Krush Square Grinder: Kube 2.0, 2.0 XL and 3.0 Compared

The Krush square grinder is the Kube: an aluminum grinder with a square body and rounded corners. It comes in three versions. The Kube 2.0 is the compact one. The Kube 2.0 XL is the larger one. The Kube 3.0 is taller, with a separate collection chamber. All three are in stock at Insomnia Smoke, in the Krush Kube 2.0, Krush Kube 2.0 XL and Krush Kube 3.0 listings.

This guide covers what sets the Kube apart, how the square body feels compared with a round grinder, the materials and teeth, and which size suits which user.

Insomnia Smoke
Compare the Krush Kube Grinders

Insomnia Smoke carries the Kube 2.0, 2.0 XL and 3.0, so you can compare their sizes and features.
Visit

Key Takeaways

  • The Kube has a square body with rounded corners. Your fingers get flat sides to hold and corners to turn against.
  • It is made of anodized aluminum with a tooth design built to fluff the material rather than compress it.
  • Kube 2.0: compact, 55 × 55 × 34 mm. Kube 2.0 XL: larger, with a bigger grinding dish. Kube 3.0: taller, with a separate collection chamber.
  • Pick by use: pocket and daily carry, larger batches, or a grinder that keeps ground material in its own chamber.
  • All three are sold for adult customers (18+) at Insomnia Smoke.

Table of Contents

What Makes Krush Grinders Distinctive

Most grinders are round discs. Krush went the other way. The Kube is a square block with softened corners, and the whole range is built around that shape.

The maker’s own engineering notes are careful about what the shape does. According to Krush’s own page on round versus square grinders, shape alone does not decide how a grind burns. What the square body reliably changes is handling and storage. The 55 × 55 mm footprint sits flat and stacks, and the design looks deliberate on a table.

That is a practical way to look at it. A grinder is something you pick up many times a week. How it sits in the hand and in a drawer matters more than a marketing claim.

The Square Body and Rounded Corners in Your Hand

A grinder is gripped with one hand and twisted with the other. Where the fingers rest decides how much effort that takes.

Holding a traditional round grinder

A round grinder has one continuous curved edge. Fingers have nothing to catch on. Many round grinders add knurling (a ridged edge) or a textured surface to compensate. Even so, a smooth or slightly oily body can slip, and the grip comes from squeezing harder.

Holding a Kube

The Kube has four flat sides and four rounded corners. The flat sides give the fingertips a defined place to rest. The corners act as stops: when you turn the top, your fingers and thumb push against an edge instead of sliding around a circle.

The corners are rounded, not sharp. They sit comfortably in the palm and do not dig into the skin when you twist.

In practice:

  • Gripping: the flat faces give a stable hold, even with dry or slightly sticky hands.
  • Turning: the corners give a point to push against, so the twist needs less squeeze.
  • Setting down: the body does not roll. It rests flat on a table, tray or shelf.
  • Storing: squares stack and fit side by side in a drawer, a box or a bag.

This is a difference in feel, not a claim about the grind. Handling is where the square body shows its value.

Materials, Finish and Tooth Design

Anodized aluminum

The Kube is made of aluminum. The manufacturer’s Kube 2.0 page lists the material as 6063 anodized aluminum. Anodizing is a surface treatment that hardens the outer layer of the metal and gives it a consistent colored finish. In daily use that means a surface that resists scratches and wipes clean.

Aluminum is light for its size. The Kube 2.0 weighs roughly 170 to 175 g, depending on the listing, which is enough to feel solid without being heavy in a pocket.

Finish and colors

The Kube comes in several colorways and finishes. Black, grey, and earth tones are the typical choices, so the grinder looks like a design object and not a gadget. Check the product page for the finish currently in stock. For other designs that put looks first, see our guide to aesthetic weed grinders.

Tooth design

The teeth are the part that does the work. Krush describes an inward-sloped tooth pattern on the Kube. The manufacturer states that this tooth design fluffs the material as it grinds, to produce a particle size suited to rolling and smoking.

What that means for you:

  • Fluffed material packs evenly in a joint or a bowl.
  • A consistent grind loads more easily into a vaporizer chamber.
  • A medium shred is the target, neither powder nor chunks.

The catalogue lists the Kube 2.0 and 3.0 as medium shred. Grind time is short: a few twists are enough for a small amount.

Kube 2.0, 2.0 XL and 3.0: The Differences

The three models share the square body, the aluminum build and the tooth idea. They differ in size, capacity and construction. The figures below come from the maker’s 2026 catalogue.

Kube 2.0 Kube 2.0 XL Kube 3.0
Size 55 × 55 × 34 mm Larger body 55 × 55 × 46 mm
Weight 175 g 300 g 185 g
Grinding dish capacity 2.5 g 4.20 g 2.5 g
Grind Medium shred Medium shred Medium shred
Construction Compact grinder Larger, heavier grinder Taller, with a separate collection chamber

The weight of the Kube 2.0 is listed as 170 g on some pages and 175 g on others. The difference is small and comes down to how each page measures it.

Kube 2.0: the compact one

The Kube 2.0 is 55 × 55 × 34 mm. It fits in a jacket pocket, a small pouch or a dugout case. The 2.5 g dish holds enough for a few joints or a session of bowls. It is the model for daily carry and for people who grind small amounts often.

Krush Kube 2.0 Aluminium Grinder

If you are new to grinders, this is the simplest starting point. One compact body, a clean grip and a standard capacity.

Kube 2.0 XL: the larger one

Krush Kube 2.0 XL Aluminium Grinder

The XL keeps the Kube shape and scales it up. The dish holds 4.20 g, which is almost double the 2.0. At 300 g it is also the heaviest of the three. That weight makes it feel steady on a table, and the larger body is easier to grip with a full hand.

Choose the XL if you:

  • grind several grams at once,
  • fill vaporizer chambers or roll multiple joints in one sitting,
  • keep a grinder at home and do not carry it daily.

Compare the sizes against what you carry. A 300 g grinder is a desk or shelf item, not a pocket item.

Kube 3.0: the one with a collection chamber

The Kube 3.0 is taller, at 55 × 55 × 46 mm, but keeps the same square footprint. The extra 12 mm over the 2.0 gives room for a separate collection chamber. Ground material falls into its own space below the teeth, away from the grinding dish.

What that changes:

  • The ground material is kept in one place and can be stored there until you use it.
  • The grind is easier to pour or scoop without picking the grinder apart.
  • The dish capacity stays at 2.5 g, with a weight of 185 g.

The 3.0 suits people who like the Kube shape but prefer a grinder that holds the ground material in its own chamber.

Which Kube Should You Choose?

Start with how you use a grinder, not with the specs.

If you want Choose
The smallest footprint, easy carry Kube 2.0
Bigger batches, a heavier and steadier body Kube 2.0 XL
A separate chamber for ground material Kube 3.0

A few further points:

  • Capacity versus size. The 2.0 and 3.0 both hold 2.5 g in the dish. The 3.0 is taller, not wider. If pocket space is the limit, the 2.0 is the better fit.
  • Weight. At 175 g, 185 g and 300 g, the three are far enough apart to feel different in the hand. The XL is a different object from the other two.
  • Storage. All three share a 55 mm square footprint on the standard models, so the 2.0 and 3.0 stack and sit side by side easily.
  • Gifting. The Kube works as a gift because the square body and finish are recognizable. See Herb Grinders for the wider range.

Pair a grinder with storage and odor control to keep the whole setup together: Storage Products and Smoke Odor Control are in the same shop.

Shop the Krush Kube at Insomnia Smoke

Insomnia Smoke carries the Kube 2.0, the Kube 2.0 XL and the Kube 3.0. The shop was founded in 2018 and ships discreetly, including EU and UK delivery promotions. Orders are for adults aged 18 and over. Open the Krush Kube 3.0, Kube 2.0 or Kube 2.0 XL page to see the current price and finishes.

Krush Kube 3.0 Aluminium Grinder

The full range of other models is on the Herb Grinders page, with the rest of the catalog on the Insomnia Smoke homepage.

Care and Storage for an Aluminum Grinder

A Kube needs little upkeep. Three habits keep it working well.

  1. Brush the teeth. After use, tap out loose material and brush the teeth and the dish. Resin builds up where the material is pressed.
  2. Wipe the body. A dry or slightly damp cloth cleans the anodized surface. Avoid abrasive pads that scratch the finish.
  3. Deep clean when it turns sticky. If the top becomes hard to turn, clean it more thoroughly. Our milk method for cleaning a metal grinder walks through the steps, and the Kannastör GR8TR cleaning tips apply to most metal grinders.

Store the grinder and the herb away from heat, light and moisture. Cool, dry, light-protected storage between 15 and 25 °C is the guideline a German source gives for keeping ground material in good condition. For herb itself, see how to keep herbs fresh without drying them out.

Our Perspective

A grinder is a tool you handle every day. We look at three things: how it feels, how it is built and how well it fits the way you use it.

The Kube answers the first one clearly. The square body gives your fingers a place to rest, and the rounded corners give your hand something to turn against. A round grinder asks for more squeeze. The Kube asks for less.

On build, aluminum with an anodized finish and a purpose-designed tooth pattern is a solid base. The three models cover three needs. The 2.0 is for carry. The 2.0 XL is for volume. The 3.0 is for a separate collection chamber.

We stock the Kube range because our catalog is built around established American, Canadian and European brands, and Krush is one of the clearest examples of design-led grinders. If you are choosing for the first time, start with how you will use it: pocket, table or chamber.

Insomnia Smoke

FAQ

What is the Krush square grinder?

It is the Krush Kube, an aluminum grinder with a square body and rounded corners. It comes as the Kube 2.0, the 2.0 XL and the 3.0. The square shape is for handling and storage.

Is a square grinder easier to hold than a round one?

The Kube’s flat sides and rounded corners give your fingers a place to rest and a point to turn against. A round grinder has a continuous curved edge with fewer natural grip points. Comfort is personal, but many users find the square body steadier.

Which Kube has a separate collection chamber?

The Kube 3.0. It is taller than the 2.0 at 46 mm against 34 mm, and it keeps ground material in its own chamber. The footprint stays at 55 × 55 mm.

How much does each Kube hold?

The catalogue lists a 2.5 g dish for the Kube 2.0 and the Kube 3.0, and 4.20 g for the Kube 2.0 XL. The XL suits larger batches. The 2.0 and 3.0 suit smaller amounts.

How do I keep a Kube clean?

Brush the teeth and dish after use, wipe the body with a soft cloth and deep clean when the top gets sticky. Avoid abrasive pads on the anodized surface.

Sources

 

Insomnia Smoke logo

Lisatud ostukorvi edukalt!

STAY UP TO DATE

Submit your email to get updates on products and special promotions.